Fast Shipping Australia Wide - Friendly Service!!! Learn more

18kN Removable Shipping Container Fall Arrest Anchor Post

SKU: HS8000

$1,550.35

Need Extras?

Fast Onsite Delivery
30 Day Guarantee
100% Secure

Share

Description

The Shipping Container Anchor Post (SCAP) is designed to provide a limited free fall arrest system for working on top of a 20ft or 40ft shipping container.

SCAP can either be used on its own as a limited free fall arrest anchor or in conjunction with a Horizontal Lifeline System (HLS) depending on the demand of the work being carried out on the container.

The anchor post is designed to utilize the corner castings on the container as the installation point for the system.
There are restrictions and limitations that must be carefully considered in the selection, installation and operation of this equipment.

The Shipping Container Anchor Post (SCAP) is designed to provide a limited free fall arrest system for working on top of a 20ft or 40ft shipping container.

SCAP can either be used on its own as a limited free fall arrest anchor or in conjunction with a Horizontal Lifeline System (HLS) depending on the demand of the work being carried out on the container.

The anchor post is designed to utilize the corner castings on the container as the installation point for the system.
There are restrictions and limitations that must be carefully considered in the selection, installation and operation of this equipment.

Shipping Container Anchor Post  – dynamically tested to 18kN as per section 6.3.2.2 of AS/NZS5532:2013 and statically tested to 18kN as per section 6.3.1 of AS/NZS5532:2013.

Container Post SCAP & HLS SAFE ZONE

 SAFE WORKING ZONES for SLR-Horizontal Life Line and SLR or 600mm Energy absorbing lanyard.

The SCAP are installed by inserting the bottom of the post into the corner casting of the shipping container. Using the lever on top of the post, (turn anti-clockwise to tighten), adjust the locking nut in the container casting such that it sits perpendicular to the opening slot of the cast.

Before using the SCAP, the user needs to be equipped with appropriate PPE and a full body harness compliant to AS/NZS1891.1.

An SRL shall be attached to the SCAP personnel attachment point which gets attached to the harness of the user.
When working close to the edge of the container, the worker shall not be further than 600mm of the installed anchor point. This is the safe working zone to prevent a pendulum effect from occurring in case of a fall.

For technical information or an onsite demo please contact Gary Clayton on 0448 005 761 or gary@industroquip.com.au 

 

Specifications
SKU HS8000
Brand BTS Tech
Be The First To Review This Product!

Help other Industroquip Safety users shop smarter by writing reviews for products you have purchased.

Write a product review

We Also Recommend

Others Also Bought

More From This Category