Fast Shipping Australia Wide - Friendly Service!!! Learn more

3SIXTY™ 360 RAPID Fall Arrest Roof Anchor Point

SKU: AP135A

$258.18
Fast Onsite Delivery
30 Day Guarantee
100% Secure

Share

Description
3SIXTY RAPID TOP MOUNT ANCHOR
  • Simple, rapid installation – 8 rivets only
  • Lightweight construction weighing 800g – carton of 10 very easy to handle
  • Allows connection to 2 roof sheets – increased anchor redundancy
  • Maximum energy absorbing ability – allows connection to lighter gauge structures
  • 15kN rated fall arrest rated – tested and compliant with all required Standards
  • Rope access rescue ability from activated anchor – provides options for rescue planning
  • Powder coated finish – minimum visual impact and maximises dissimilar metal protections
  • Includes fixings
DETAILS

The 3SIXTY RAPID Anchor is ideally suited to maintenance personnel working at heights utilising a harness and lanyard. 

  • The 15kN fall arrest rated anchor incorporates a unique energy absorbing swivel eye lanyard attachment point, eliminating snap hook roll-out and providing uniform load distribution to the anchor plate and allowing fixture to lighter structures and roof decks.
  • The increased energy absorption properties and ability to be connected to 2 roof sheets allows fixture to lighter structures and roof decks.
  • The 3SIXTY RAPID Anchor is designed to allow emergency rope access from the activated anchor for rescue in a fall situation.
NOTE
  • Not suitable for use as a primary rope access anchor, however in the event of an emergency rescue it is designed for use as a rope access anchorage. It is recommend that 2 separate anchors should be used where possible.
MATERIALS
  • Base plate – aluminium alloy 6005-T5
  • Swivel eye – profiled stainless steel
DIMENSIONS
  • Overall size – 250mm x 288mm
WEIGHT
  • 800g (includes fixings)
FIXINGS
  • Timber purlin fixing – 14g / 75mm type 17 tek screws
  • Metal purlin fixing – 14g / 75mm self-drilling tek screws
  • Metal roof deck fixing – 8mm structural Bulbtite rivets
WORKING LOAD LIMIT

Single person use

  • Support structure integrity, suitability and fixing method to be assessed and determined by a competent person prior to installation
  • 3SIXTY RAPID Top Mount Anchor must be used in conjunction with an approved harness and lanyard system incorporating an energy absorber
COMPLIANCE

3SIXTY RAPID Top Mount Anchor is designed and manufactured in accordance with requirements of Standards AS/NZS 1891.4:2009 and AS/NZS 5532:2013 and relevant statutory OHS Codes of Practice/Guidelines.

PRODUCT WARRANTY

10 years from date of purchase subject to correct installation, use and maintenance in accordance with manufacturer’s specifications and recommendations.

INSPECTION AND MAINTENANCE

Inspection and certification required every 12 months by competent person in accordance with manufacturer’s specifications and requirements of Standard AS/NZS 1891.4:2009 Section (9).

IMPORTANT NOTE

Failure to supply and/or install proprietary product in accordance with above Standards and codes, specifications and instructions voids complete system certification and/or warranty.

Specifications
SKU AP135A
Be The First To Review This Product!

Help other Industroquip Safety users shop smarter by writing reviews for products you have purchased.

Write a product review

Others Also Bought

More From This Category