SKU: ST580M.1000
Katt™ Aluminium Step Ladder with 900mm platform
Designed to attach to top of roof deck or structure with 900mm platform access.
Step ladders provide safe and easy access to varying heights including roof areas, service platforms and other elevated areas where frequent access is required. Manufactured to Australian Standard AS/NZS 1657:2018 which ensures a high level of safety and confidence for maintenance personnel.
They can be delivered flat packed to site and are designed to conform to Australian & New Zealand Standard AS/NZS1657:2018.
Designed to attach to top of roof deck or structure with 900mm platform access
150kg rated
Designed to attach to underside of roof hatch
High level of safe and easy access
Slip resistance tested to AS4586:2013
Lightweight, robust aluminium construction
Modular design for easy delivery and site assembly
All components and accessories manufactured from high grade structural aluminium with options for powder coating.
Maximum height: 6.0m
Overall ladder width: 650mm
Distance between stiles: 560mm
Step size: 600mm (L) x 100mm (W) x 38mm (H)
Step spacing: up to 300mm
Stile extension above landing surface: 1000mm
Minimum clearance behind ladder: 150mm
Content...
Steel purlin (min 2.0mm): M10 S/S bolt or M8 toggle bolt or 14G Tek screw
Steel structure: M10 S/S bolts
Concrete (min 25MPa): M10 tru-bolt or M8 screw bolt
Brick: M8 Screw bolt
Composite panel: M10 through bolt or M8 toggle bolts
Angle of slope: 65 degrees
Support structure integrity, suitability and fixing method to be assessed and determined by a engineer unless it is clear to a competent person prior to installation.
Recommended for single person use - 150kg rated
Industrial rated, suited to high frequency usage
Kattsafe step ladders are designed to conform with requirements of the Australian & New Zealand Standards AS 1657:2018 and relevant codes of practices and guidelines.
Testing and performance based on requirements of Australian Standard AS 1657:2018.
Slip resistance testing to AS4586:2013 (Rating – R11).
10 years from the date of purchase subject to correct installation. Use and maintenance to be in accordance with manufacturer's specifications and recommendations. (This excludes wearing parts).
Inspection and certification required every 12 months by competent person in accordance with manufacturer’s specifications and requirements of Australian Standards AS1657:2018 and AS/NZS 1891:2009 Section 9.
Failure to supply and/or install proprietary product in accordance with above standards and codes, specifications and instructions voids complete system certificate and/or warranty.
SKU | ST580M |
Help other Industroquip Safety users shop smarter by writing reviews for products you have purchased.